臺灣牙醫實作指引 (Taiwan Dental Implementation Guide)
1.0.0 - release

臺灣牙醫實作指引 (Taiwan Dental Implementation Guide) - Local Development build (v1.0.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Logical Model: TWDentalIOPIModel - Detailed Descriptions

Active as of 2026-11-03

Definitions for the TWDentalIOPI logical model.

See the documentation on how to interpret the contents of this table

0. TWDentalIOPI
Definition

IOPI(Iowa Oral Performance Instrument)病人進展紀錄表之資料模型,用於記錄以 IOPI 系統進行舌頭或嘴唇肌力訓練之追蹤資料,包含每週(第0至8週)之最大壓力(Pmax)、耐力(Endurance)量測值,以及運動處方細節(用力程度、目標壓力與訓練頻率)。

Short牙醫-IOPI 病人進展紀錄表 (TW Dental IOPI) 之資料模型
Control0..*
Is Modifierfalse
Logical ModelInstances of this logical model are not marked to be the target of a Reference
2. TWDentalIOPI.identifier
Definition

病人進展紀錄表的唯一識別碼。

Short紀錄表識別碼
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
4. TWDentalIOPI.subject
Definition

接受 IOPI 肌力訓練追蹤的病人(Patient ID)。

Short受評估對象(病人)
Control1..1
TypeReference
6. TWDentalIOPI.year
Definition

本紀錄表所屬年度。

Short年度 (Year)
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
8. TWDentalIOPI.bulbPosition
Definition

IOPI 量測球囊放置位置(tongue=舌頭; lip=嘴唇)。

Short球囊位置 (Bulb position)
Control0..1
BindingThe codes SHALL be taken from IOPI 量測球囊位置值集
(required to http://dental-ig.fhir.tw/ValueSet/VS-IOPIBulbPosition-twdental)
Typecode
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
10. TWDentalIOPI.measurement
Definition

各週次(第0至8週)之評估量測值與運動處方細節。

Short每週量測與處方 (Weekly measurement)
Control0..*
TypeBackboneElement
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. TWDentalIOPI.measurement.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
14. TWDentalIOPI.measurement.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on TWDentalIOPI.measurement.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. TWDentalIOPI.measurement.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. TWDentalIOPI.measurement.week
Definition

量測週次(0–8)。第0週為基準值(baseline)。

Short週次 (Week)
Control1..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "week" : 0
}
<week value="0"/>
Max Value
{
  "week" : 8
}
<week value="8"/>
20. TWDentalIOPI.measurement.date
Definition

該週次量測的日期。

Short日期 (Date)
Control0..1
Typedate
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
22. TWDentalIOPI.measurement.pMax
Definition

最大壓力量測值,單位 kPa。

Short最大壓力 Pmax (kPa)
Control0..1
Typedecimal
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "pMax" : 0
}
<pMax value="0"/>
24. TWDentalIOPI.measurement.endurance
Definition

耐力量測值,單位秒(sec)。

Short耐力 Endurance (sec)
Control0..1
Typedecimal
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "endurance" : 0
}
<endurance value="0"/>
26. TWDentalIOPI.measurement.effort
Definition

運動處方之用力程度,單位百分比(%)。

Short用力程度 Effort (%)
Control0..1
Typedecimal
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "effort" : 0
}
<effort value="0"/>
Max Value
{
  "effort" : 100
}
<effort value="100"/>
28. TWDentalIOPI.measurement.target
Definition

運動處方之目標壓力,單位 kPa。

Short目標壓力 Target (kPa)
Control0..1
Typedecimal
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "target" : 0
}
<target value="0"/>
30. TWDentalIOPI.measurement.repsPerSet
Definition

每一組(Set)之反覆次數。

Short每組次數 (#Reps/Set)
Control0..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "repsPerSet" : 0
}
<repsPerSet value="0"/>
32. TWDentalIOPI.measurement.setsPerSession
Definition

每一次訓練(Session)之組數。

Short每次組數 (#Sets/Session)
Control0..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "setsPerSession" : 0
}
<setsPerSession value="0"/>
34. TWDentalIOPI.measurement.sessionsPerDay
Definition

每日訓練次數(Session)。

Short每日次數 (#Sessions/Day)
Control0..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "sessionsPerDay" : 0
}
<sessionsPerDay value="0"/>
36. TWDentalIOPI.measurement.daysPerWeek
Definition

每週訓練天數。

Short每週天數 (#Days/Week)
Control0..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "daysPerWeek" : 0
}
<daysPerWeek value="0"/>
Max Value
{
  "daysPerWeek" : 7
}
<daysPerWeek value="7"/>

See the documentation on how to interpret the contents of this table

0. TWDentalIOPI
Definition

IOPI(Iowa Oral Performance Instrument)病人進展紀錄表之資料模型,用於記錄以 IOPI 系統進行舌頭或嘴唇肌力訓練之追蹤資料,包含每週(第0至8週)之最大壓力(Pmax)、耐力(Endurance)量測值,以及運動處方細節(用力程度、目標壓力與訓練頻率)。

Short牙醫-IOPI 病人進展紀錄表 (TW Dental IOPI) 之資料模型
Logical ModelInstances of this logical model are not marked to be the target of a Reference
2. TWDentalIOPI.identifier
Definition

病人進展紀錄表的唯一識別碼。

Short紀錄表識別碼
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
4. TWDentalIOPI.subject
Definition

接受 IOPI 肌力訓練追蹤的病人(Patient ID)。

Short受評估對象(病人)
Control1..1
TypeReference
6. TWDentalIOPI.year
Definition

本紀錄表所屬年度。

Short年度 (Year)
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
8. TWDentalIOPI.bulbPosition
Definition

IOPI 量測球囊放置位置(tongue=舌頭; lip=嘴唇)。

Short球囊位置 (Bulb position)
Control0..1
BindingThe codes SHALL be taken from IOPI 量測球囊位置值集
(required to http://dental-ig.fhir.tw/ValueSet/VS-IOPIBulbPosition-twdental)
Typecode
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
10. TWDentalIOPI.measurement
Definition

各週次(第0至8週)之評估量測值與運動處方細節。

Short每週量測與處方 (Weekly measurement)
Control0..*
TypeBackboneElement
12. TWDentalIOPI.measurement.week
Definition

量測週次(0–8)。第0週為基準值(baseline)。

Short週次 (Week)
Control1..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "week" : 0
}
<week value="0"/>
Max Value
{
  "week" : 8
}
<week value="8"/>
14. TWDentalIOPI.measurement.date
Definition

該週次量測的日期。

Short日期 (Date)
Control0..1
Typedate
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
16. TWDentalIOPI.measurement.pMax
Definition

最大壓力量測值,單位 kPa。

Short最大壓力 Pmax (kPa)
Control0..1
Typedecimal
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "pMax" : 0
}
<pMax value="0"/>
18. TWDentalIOPI.measurement.endurance
Definition

耐力量測值,單位秒(sec)。

Short耐力 Endurance (sec)
Control0..1
Typedecimal
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "endurance" : 0
}
<endurance value="0"/>
20. TWDentalIOPI.measurement.effort
Definition

運動處方之用力程度,單位百分比(%)。

Short用力程度 Effort (%)
Control0..1
Typedecimal
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "effort" : 0
}
<effort value="0"/>
Max Value
{
  "effort" : 100
}
<effort value="100"/>
22. TWDentalIOPI.measurement.target
Definition

運動處方之目標壓力,單位 kPa。

Short目標壓力 Target (kPa)
Control0..1
Typedecimal
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "target" : 0
}
<target value="0"/>
24. TWDentalIOPI.measurement.repsPerSet
Definition

每一組(Set)之反覆次數。

Short每組次數 (#Reps/Set)
Control0..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "repsPerSet" : 0
}
<repsPerSet value="0"/>
26. TWDentalIOPI.measurement.setsPerSession
Definition

每一次訓練(Session)之組數。

Short每次組數 (#Sets/Session)
Control0..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "setsPerSession" : 0
}
<setsPerSession value="0"/>
28. TWDentalIOPI.measurement.sessionsPerDay
Definition

每日訓練次數(Session)。

Short每日次數 (#Sessions/Day)
Control0..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "sessionsPerDay" : 0
}
<sessionsPerDay value="0"/>
30. TWDentalIOPI.measurement.daysPerWeek
Definition

每週訓練天數。

Short每週天數 (#Days/Week)
Control0..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "daysPerWeek" : 0
}
<daysPerWeek value="0"/>
Max Value
{
  "daysPerWeek" : 7
}
<daysPerWeek value="7"/>

See the documentation on how to interpret the contents of this table

0. TWDentalIOPI
Definition

IOPI(Iowa Oral Performance Instrument)病人進展紀錄表之資料模型,用於記錄以 IOPI 系統進行舌頭或嘴唇肌力訓練之追蹤資料,包含每週(第0至8週)之最大壓力(Pmax)、耐力(Endurance)量測值,以及運動處方細節(用力程度、目標壓力與訓練頻率)。

Short牙醫-IOPI 病人進展紀錄表 (TW Dental IOPI) 之資料模型
Control0..*
Is Modifierfalse
Logical ModelInstances of this logical model are not marked to be the target of a Reference
2. TWDentalIOPI.identifier
Definition

病人進展紀錄表的唯一識別碼。

Short紀錄表識別碼
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
4. TWDentalIOPI.subject
Definition

接受 IOPI 肌力訓練追蹤的病人(Patient ID)。

Short受評估對象(病人)
Control1..1
TypeReference
6. TWDentalIOPI.year
Definition

本紀錄表所屬年度。

Short年度 (Year)
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
8. TWDentalIOPI.bulbPosition
Definition

IOPI 量測球囊放置位置(tongue=舌頭; lip=嘴唇)。

Short球囊位置 (Bulb position)
Control0..1
BindingThe codes SHALL be taken from IOPI 量測球囊位置值集
(required to http://dental-ig.fhir.tw/ValueSet/VS-IOPIBulbPosition-twdental)
Typecode
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
10. TWDentalIOPI.measurement
Definition

各週次(第0至8週)之評估量測值與運動處方細節。

Short每週量測與處方 (Weekly measurement)
Control0..*
TypeBackboneElement
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. TWDentalIOPI.measurement.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
14. TWDentalIOPI.measurement.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on TWDentalIOPI.measurement.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. TWDentalIOPI.measurement.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. TWDentalIOPI.measurement.week
Definition

量測週次(0–8)。第0週為基準值(baseline)。

Short週次 (Week)
Control1..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "week" : 0
}
<week value="0"/>
Max Value
{
  "week" : 8
}
<week value="8"/>
20. TWDentalIOPI.measurement.date
Definition

該週次量測的日期。

Short日期 (Date)
Control0..1
Typedate
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
22. TWDentalIOPI.measurement.pMax
Definition

最大壓力量測值,單位 kPa。

Short最大壓力 Pmax (kPa)
Control0..1
Typedecimal
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "pMax" : 0
}
<pMax value="0"/>
24. TWDentalIOPI.measurement.endurance
Definition

耐力量測值,單位秒(sec)。

Short耐力 Endurance (sec)
Control0..1
Typedecimal
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "endurance" : 0
}
<endurance value="0"/>
26. TWDentalIOPI.measurement.effort
Definition

運動處方之用力程度,單位百分比(%)。

Short用力程度 Effort (%)
Control0..1
Typedecimal
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "effort" : 0
}
<effort value="0"/>
Max Value
{
  "effort" : 100
}
<effort value="100"/>
28. TWDentalIOPI.measurement.target
Definition

運動處方之目標壓力,單位 kPa。

Short目標壓力 Target (kPa)
Control0..1
Typedecimal
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "target" : 0
}
<target value="0"/>
30. TWDentalIOPI.measurement.repsPerSet
Definition

每一組(Set)之反覆次數。

Short每組次數 (#Reps/Set)
Control0..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "repsPerSet" : 0
}
<repsPerSet value="0"/>
32. TWDentalIOPI.measurement.setsPerSession
Definition

每一次訓練(Session)之組數。

Short每次組數 (#Sets/Session)
Control0..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "setsPerSession" : 0
}
<setsPerSession value="0"/>
34. TWDentalIOPI.measurement.sessionsPerDay
Definition

每日訓練次數(Session)。

Short每日次數 (#Sessions/Day)
Control0..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "sessionsPerDay" : 0
}
<sessionsPerDay value="0"/>
36. TWDentalIOPI.measurement.daysPerWeek
Definition

每週訓練天數。

Short每週天數 (#Days/Week)
Control0..1
Typeinteger
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Min Value
{
  "daysPerWeek" : 0
}
<daysPerWeek value="0"/>
Max Value
{
  "daysPerWeek" : 7
}
<daysPerWeek value="7"/>